Removal And Installation

BACK DOOR TRIM


Removal and Installation


REMOVAL
1. Fully open the back door.
2. Insert a remover tool between back door panel and back door finisher upper to disengage the pawls, and the remove the back door finisher upper.
3. Remove back door finisher lower.





1. Remove the cap of back door finisher hook (1) with a small flat-bladed screwdriver (A) wrapped into a tape (B).





2. Remove the mounting bolt.
3. Remove back door finisher hook with remover tool.





4. Insert a remover tool between back door panel and back door finisher lower to disengage the pawls and clips and remove the back door finisher lower.
4. Insert a remover tool between back door panel and back door finisher side to disengage the pawls, and the remove the back door finisher side (LH/RH).

INSTALLATION
Install in the reverse order of removal.