Removal And Installation

FRONT FENDER


Removal and Installation


CAUTION:
Use protective tape or shop cloth to protect from damage during removal and installation.

REMOVAL
1. Remove front bumper fascia. Refer to Removal And Installation.
2. Remove front combination lamp. Refer to Removal And Installation.
3. Remove side turn signal lamp. Refer to Removal And Installation.





4. Remove clips (A) of hood seal (side) (1).
5. Remove clips and screws of fender protector. Refer to Removal And Installation.
6. Remove center mud guard. Refer to .
7. Remove mounting bolts and remove front fender.

INSTALLATION
Install in the reverse order of removal.

CAUTION:
- After installation, apply the touch-up paint (the body color) onto the head of front fender mounting bolts.
- After installation, adjust the following parts.
- Hood assembly: Refer to Adjustments.
- Door: Refer to Adjustments.
- Front combination lamp: Refer to Headlamp Aiming Adjustment.