Disassembly and Assembly

CENTER CONSOLE ASSEMBLY


Disassembly and Assembly


CAUTION:
When disassembling, always use a remover tool that is made of plastic.

DISASSEMBLY
1. Open the console lid.





2. Pull up console tray assembly (1), and then remove console tray assembly from center console assembly (2).
3. Remove inside key antenna.





- Disconnect inside key antenna harness connector.
- Remove inside key antenna (1) fixing screws (A).
- Pull up inside key antenna from center console assembly (2).





4. Remove console sub-harness.
- Disconnect harness connectors (A).
- Remove console sub-harness (1) fixing harness clips from center console assembly (2).





5. Remove console pocket assembly.
- Remove console pocket assembly (1) fixing screws.
- Pull up console pocket assembly from center console assembly (2).





6. Remove the following parts after removing console pocket assembly (4).
- Remove console power socket (1). Refer to Removal And Installation.
- Remove auxiliary input jacks (2). Refer to Removal And Installation.
- Remove iPod adapter (3). Refer to Removal And Installation.

ASSEMBLY
Assemble in the reverse order of disassembly.