Removal and Installation

BRAKE PEDAL


Removal and Installation


REMOVAL
1. Remove instrument lower panel LH. Refer to Exploded View.
2. Remove knee protector. Refer to Removal And Installation.
3. Remove steering column assembly. Refer to Exploded View.
4. Disconnect the stop lamp switch and ASCD brake switch harness connectors.
5. Turn the stop lamp switch counterclockwise to remove the stop lamp switch.
6. Loosen the lock nut for the ASCD brake switch and remove the ASCD brake switch.





7. Remove snap pin (1) and clevis pin (2) from clevis.
8. Remove the brake pedal assembly.

INSTALLATION
Note the following, and install in the reverse order of removal.
- Apply the multi-purpose grease to the clevis pin and the mating faces. (Not necessary if grease has been already applied)

NOTE:
The clevis pin may be inserted in either direction.