Radiator Cooling Fan: Service and Repair

COOLING FAN


Disassembly and Assembly


DISASSEMBLY
1. Disconnect harness from cooling fan control module.
2. Remove cooling fan control module from cooling fan assembly.

CAUTION:
Handle carefully to avoid dropping and shocks.
3. Remove cooling fan mounting nuts, and then remove the cooling fan (RH and LH).
4. Remove fan motors (RH and LH).

ASSEMBLY
Note the following, and assemble in the reverse order of disassembly.

CAUTION:
RH and LH cooling fans are different. Be careful not to mis-assemble them.
- Install each fan in the following position.





- Secure the harness tightly to the fan shroud to prevent the fan rotation area from being loose.