Camshaft Bearing

CAM BEARING CAP






- Tighten mounting bolts in the following step, in numerical order as shown in the figure.

A : Bank 1
B : Bank 2
Arrow indicates Engine front


i. Tighten bolts in numerical order as shown.

Torque: 1.96 N-m (0.20 kg-m, 1 ft-lb)

ii. Tighten bolts in numerical order as shown.

Torque: 5.88 N-m (0.60 kg-m, 4 ft-lb)

iii. Tighten bolts in numerical order as shown.

Torque: 10.4 N-m (1.1 kg-m, 8 ft-lb)