Intake Manifold

INTAKE MANIFOLD

- If stud bolts were removed, install them and tighten to the torque specified below.

Torque 10.8 N.m (1.1 kg-m, 8 ft-lb)




- Tighten all mounting bolts to the specified torque in two or more steps in numerical order as shown in the figure.

Arrow Indicates Engine Front.

CAUTION: Install intake manifold with the marks (put on the intake manifold and the cylinder head before removal) aligned.





Intake Manifold Collector

Intake Manifold Collector Bolt 10.8 Nm (1.1 kg.m 8 ft. lb.)





Arrow indicates Engine front