Main Bearing

MAIN BEARING CAP






1a.- Tighten bolts (No. 17 to 26) in numerical order as shown in the figure.

Arrow indicates Engine front


Torque: 25.0 N-m (2.6 kg-m, 18 ft-lb)

b. Repeat step 1a.
c. Tighten bolts (No. 1 to 16) in numerical order as shown in the figure.

NOTE:
Use TORX socket for bolts No.1 to 16.

Torque: 35.3 N-m (3.6 kg-m, 26 ft-lb)

d. Turn bolts (No. 1 to 16) 90 degrees clockwise (angle tightening).

CAUTION:
Use the angle wrench [SST: KV10112100 (BT8653-A)] (A) to check tightening angle. Never make judgment by visual inspection.