Removal And Installation

FRONT COMBINATION LAMP


Removal and Installation


CAUTION:
Disconnect the battery negative terminal or remove the fuse.

REMOVAL
1. Remove the front bumper fascia. Refer to Exploded View.
2. Remove the headlamp mounting bolts and clip.
3. Remove the holding clip (A)* and harness clip.





*: Left side only
4. Pull out the headlamp assembly forward the vehicle.
5. Disconnect the connector before removing the headlamp housing assembly.

INSTALLATION
Install in the reverse order of removal.

NOTE:
- After installation, perform aiming adjustment. Refer to Headlamp Aiming Adjustment.
- After installation, check that headlamp lighting. Refer to Inspection After Installation (HID Control Unit).