Diagnosis Procedure

PARKING LAMP CIRCUIT


WITH DAYTIME RUNNING LIGHT SYSTEM : Diagnosis Procedure

1.CHECK PARKING LAMP BULB
Check the applicable lamp bulb.
Is the bulb normal?
YES - GO TO 2.
NO - Replace the bulb.
2.CHECK PARKING LAMP OPEN CIRCUIT
1. Turn the ignition switch OFF.
2. Remove the daytime running light relay.
3. Disconnect the front combination lamp connector.
4. Check continuity between the daytime running light relay harness connector and the front combination lamp harness connector.





Does continuity exist?
YES - GO TO 3.
NO - Repair the harnesses or connectors.
3.CHECK PARKING LAMP SHORT CIRCUIT
Check continuity between the daytime running light relay harness connector and the ground.





Does continuity exist?
YES - Repair the harnesses or connectors.
NO - GO TO 4.
4.CHECK PARKING LAMP GROUND OPEN CIRCUIT
Check continuity between the front combination lamp harness connector and the ground.





Does continuity exist?
YES - Replace the front combination lamp.
NO - Repair the harnesses or connectors.