Component Function Check

S-MODE SWITCH


Component Function Check

1.CHECK S-MODE SWITCH FUNCTION-I

NOTE:
If DTC UXXXX are displayed, first perform the trouble diagnosis for DTC UXXXX.
1. Turn ignition switch ON.
2. Select "M/T SYNCHRO SW" in "DATA MONITOR" mode with CONSULT-III.
3. Check "M/T SYNCHRO SW" indication under the following conditions.





Is the inspection result normal?
YES - GO TO 2.
NO - Go to Diagnosis Procedure.
2.CHECK S-MODE SWITCH FUNCTION-II
Check the S-MODE indicator under the following condition.





Is the inspection result normal?
YES - INSPECTION END
NO - Go to Diagnosis Procedure.