Diagnosis Procedure

SHIFT POSITION INDICATOR


Description

The shift lever position is indicated by shift position indicator on combination meter. ECM receives gear position signal from gear lever position sensor and transmits the signal to combination meter via CAN communication.




SHIFT POSITION INDICATOR


Diagnosis Procedure

1.CHECK DTC
Check that DTC UXXXX is not displayed.
Is the inspection result normal?
YES - GO TO 2.
NO - Perform trouble diagnosis for DTC UXXXX.
2.CHECK DTC WITH "COMBINATION METER"
Refer to CONSULT-III Function (Meter/M&A).
Is the inspection result normal?
YES - GO TO 3.
NO - Perform trouble diagnosis relevant to DTC indicated.
3.CHECK INTERMITTENT INCIDENT
Refer to Intermittent Incident.
Is the inspection result normal?
YES - Replace combination meter.
NO - Repair or replace.