System Specifications

CYLINDER BLOCK






AVAILABLE PISTON






PISTON RING






PISTON PIN






CONNECTING ROD










CRANKSHAFT









MAIN BEARING






UNDERSIZE






MAIN BEARING OIL CLEARANCE






CONNECTING ROD BEARING






UNDERSIZE







CONNECTING ROD BEARING OIL CLEARANCE






Crankshaft Pulley

Tighten crankshaft pulley bolt.

Torque 44.1 N.m (4.5 kg-m, 33 ft-lb)

MAIN BEARING CAP





1a.- Tighten bolts (No. 17 to 26) in numerical order as shown in the figure.

Arrow indicates Engine front


Torque: 25.0 N-m (2.6 kg-m, 18 ft-lb)

b. Repeat step 1a.
c. Tighten bolts (No. 1 to 16) in numerical order as shown in the figure.

NOTE:
Use TORX socket for bolts No.1 to 16.

Torque: 35.3 N-m (3.6 kg-m, 26 ft-lb)

d. Turn bolts (No. 1 to 16) 90 degrees clockwise (angle tightening).

CAUTION:
Use the angle wrench [SST: KV10112100 (BT8653-A)] (A) to check tightening angle. Never make judgment by visual inspection.