Disassembly and Assembly

A/T SHIFT SELECTOR


Disassembly and Assembly


DISASSEMBLY
1. Remove the position lamp.
2. Remove the adapter from the A/T shift selector assembly.





3. Insert a flat-bladed screwdriver into pawls (A: 4 locations), and remove the position indicator plate (1) from the A/T shift selector assembly (2) while lifting it up.

CAUTION:
The pawls crack easily. Be careful when removing.
4. Remove the slide cover from the A/T shift selector assembly.





5. Remove the shift lock unit (1) from the A/T shift selector assembly.

A : Screw

6. Remove the A/T shift selector harness assembly (2) from the A/T shift selector assembly.

B : Screw


CAUTION:
Be careful not to break the pawl when remove the manual mode switch (C) from the A/T shift selector assembly.

ASSEMBLY
Note the following, and assembly in the reverse order of disassembly.

CAUTION:
Apply multi-purpose grease on the surface that the shift lock unit plate slides vertically.

- Face the concave (A) of the slide cover (1) forward of the A/T shift selector assembly to install.





Arrow indicates Front side