Disassembly

SHIFT FORK AND FORK ROD


Disassembly

For disassembly procedures other than the following items, refer to "SHIFT FORK AND FORK ROD" in Disassembly (Without S-MODE) or Disassembly (With
S-MODE).

CHECK SHIFT PIN
Set the control bracket to a vise and then remove check shift pin (1) from control bracket.






STRIKING ROD






Arrow indicates Transmission front

1. Remove retaining pin ( Black arrow indicates ) using a pin punch [Commercial service tool] and then remove stopper ring from striking rod.





2. Remove retaining pin ( Black arrow indicates ) using a pin punch [Commercial service tool] and then remove low/high control lever from striking rod.