Power Window Switch: Service and Repair

POWER WINDOW MAIN SWITCH


Removal and Installation


REMOVAL
1. Remove the power window main switch finisher (2). Refer to Removal and Installation.





2. Power window main switch (1) is removed from power window main switch finisher (2) using flat-bladed screw driver (A) etc.

CAUTION:
Never fold the pawl of power window main switch finisher.

NOTE:
The same procedure is also performed for power window subswitch.

INSTALLATION
Install in the reverse order of removal.

NOTE:
Power window main switch is replaced or is removed it is necessary to do the initialization procedure. Refer to Special Repair Requirement.