Power Trunk / Liftgate Lock Actuator: Service and Repair

TRUNK LID


TRUNK LID LOCK : Removal and Installation


LOCK

Removal
1. Remove the trunk lid inner trim panel. Refer to Removal And Installation.
2. Remove the bolts, disconnect the electrical connector, separate the emergency release handle, and remove the trunk lid lock

Installation
Installation is in the reverse order of removal

Striker

Removal
1. Remove the trunk rear finisher. Refer to Removal And Installation.
2. Remove the bolts and the striker.

Installation
Installation is in the reverse order of removal.

NOTE:
Align the trunk lid lock. Refer to Adjustments.