Diagnosis Procedure

DOOR LOCK ACTUATOR


REAR RH : Description

Locks/unlocks the door with the signal from BCM.




DOOR LOCK ACTUATOR


REAR RH : Diagnosis Procedure

1.CHECK DOOR LOCK ACTUATOR SIGNAL





Check voltage between BCM connector M17 terminals 8, 10 and ground.





Is the inspection result normal?
YES - GO TO 3
NO - GO TO 2
2.CHECK DOOR LOCK ACTUATOR CIRCUIT
1. Disconnect BCM and rear door lock actuator RH connectors.





2. Check continuity between BCM connector M17 (A) terminals 8, 10 and rear door lock actuator RH connector D305 (B) terminals 5, 6.





3. Check continuity between BCM connector and ground.





Is the inspection result normal?
YES - Replace rear door lock actuator RH.
NO - Repair or replace harness.
3.CHECK INTERMITTENT INCIDENT
Refer to Intermittent Incident.
- Inspection End.