Removal And Installation

COOLING FAN


Removal and Installation







REMOVAL
1. Disconnect the 12-volt battery negative terminal.
2. Drain engine coolant from radiator, condenser and liquid tank assembly. Refer to Changing Engine Coolant.

CAUTION:
Perform when engine and inverter are cold.
3. Remove inverter upper bracket.
4. Drain inverter coolant from sub-radiator. Refer to Replacement.
5. Remove air cleaner duct (front). Refer to Service and Repair.
6. Disconnect radiator upper hose.
7. Remove sub radiator coolant reservoir tank.
8. Disconnect ECM.
9. Remove ECM and bracket assembly.
10. Disconnect radiator cooling fan controller.
11. Remove radiator cooling fan assembly.

INSTALLATION
Installation is in the reverse order of removal.
- Radiator cooling fan is controlled by ECM. For details, refer to System Description.