Inspection

COOLANT(FOR INVERTER)


Inspection


WARNING:
- Never remove the inverter cooling reservoir tank cap when the engine or inverter are hot. Serious burns could occur from high pressure coolant escaping from the inverter coolant reservoir tank.
- Wrap a thick cloth around the cap. Slowly push down and turn cap a quarter turn to allow built-up pressure to escape. Carefully remove the cap by pushing down and turning it all the way.

CHECKING COOLANT LEVEL (INVERTER COOLING SYSTEM)
1. Check if the coolant level in the inverter cooling reservoir tank





(1) is within MIN (B) to MAX (A) when coolant is cool.
Arrow indicates Front
2. Adjust inverter cooling system coolant level as necessary. Refer to Replacement.

CHECKING COOLANT CONDITION (INVERTER COOLING SYSTEM)
- Check for excessive deposits of dirt or rust in the inverter cooling system coolant.
- If the coolant contains excessive dirt or rust, replace the inverter cooling system coolant. Refer to Replacement.