Lighting and Horns: Adjustments

HEADLAMP


Aiming Adjustment







NOTE:
For details, refer to the regulations in your area.

Headlamp Aiming

NOTE:
- If the vehicle front body has been repaired and/or the headlamp assembly has been replaced, check headlamp aiming.
- Before performing headlamp aiming adjustment, check the following:
- Confirm which type of headlamp is in vehicle.
- Ensure all tires are inflated to correct pressure.
- Place vehicle and screen on level surface.
- Ensure there is no load in vehicle other than the driver (or equivalent weight placed in driver's position).
- Ensure engine coolant and engine oil are filled to correct level and fuel tank is full.
- Confirm spare tire, jack and tools are properly stowed.

AIMING ADJUSTMENT






- Basic illuminating area for adjustment should be within the range shown on the aiming chart. Adjust headlamps accordingly.
- First loosen the adjusting screw all the way and then make adjustment by tightening the screw.
1. Turn headlamp low beam on.
2. Use adjusting screws to perform aiming adjustment.