Operation CHARM: Car repair manuals for everyone.

Component Function Check





STEP LAMP CIRCUIT


Component Function Check


CAUTION:
Before performing the diagnosis, check that the following is normal.
- Battery saver output/power supply
- Step lamp bulbs
1.CHECK STEP LAMP OPERATION
CONSULT-III
1. Turn ignition switch ON.
2. Select "STEP LAMP TEST" of BCM (INT LAMP) active test item.
3. While operating the test item, check that step lamps turn ON/OFF.






Is the inspection result normal?
YES - Step lamp circuit is normal.
NO - Refer to Diagnosis Procedure.