Diagnostic Procedure 2

ON BOARD DIAGNOSTIC (OBD) SYSTEM


DIAGNOSTIC PROCEDURE 2
1. Connect CONSULT-III.
2. Diagnostic code is displayed on "SELF-DIAG [CURRENT]".
If no malfunction is detected on "SELF-DIAG [CURRENT]", but malfunction is detected in "SRS Operation Check" using the "AIR BAG" warning lamp, the following cases may exist:
- "SELF-DIAG [PAST]" memory might not be erased.
- The SRS system malfunctions intermittently.
Perform DIAGNOSTIC PROCEDURE 4. Refer to Self-Diagnosis Function (Without CONSULT-III).