System Specifications

SERVICE DATA AND SPECIFICATIONS (SDS)


Standard and Limit

CYLINDER BLOCK










PISTON, PISTON RING, AND PISTON PIN


Available Piston






Piston Ring






Piston Pin






CONNECTING ROD






CRANKSHAFT






MAIN BEARING






Undersize






Bearing Clearance






CONNECTING ROD BEARING






Undersize






Bearing Clearance






Main Bearing Cap





Tighten lower cylinder block bolts in the numerical order as shown and according to the following steps:
Apply new engine oil to threads and seat surfaces of the bolts.
Tighten bolts No. 11 - 22 only in the order as shown, to specification below.
Step 1, bolts 11 - 22 only 25.1 Nm (2.6 kg-m, 19 ft-lb)
Tighten bolts No. 1 - 10 only in the order as shown, to specification below.
Step 2, bolts 1 - 10 only 39.2 Nm (4.0 kg-m, 29 ft-lb)

CAUTION:
Check tightening angle. Do not make judgment by visual inspection.

Tighten bolts No. 1 - 10 only in the order as shown, to specification below.
Step 3, bolts 1 - 10 only 60° degrees rotation


Crankshaft Pulley Bolt

Crankshaft bolt 42.1 N.m (4.3 kg-m, 31 ft-lb)
Turn crankshaft pulley bolt another 60� to 66� degrees [Target: 60� degrees].