CAN Communication Inspection Using CONSULT-III (Self-Diagnosis)

BCM (BODY CONTROL MODULE)


CAN Communication Inspection Using CONSULT-III (Self-Diagnosis)

1.SELF-DIAGNOSTIC RESULT CHECK
1. Connect CONSULT�III and select "BCM" on "SELECT SYSTEM" screen.
2. Select "BCM" on "SELECT TEST ITEM" screen, and select "SELF-DIAG RESULTS".
3. Check display content in self-diagnostic results.





Contents displayed
No malfunction>>Inspection End
Malfunction in CAN communication system>>After printing the monitor items, go to "CAN System". Refer to Trouble Diagnosis Flow Chart.