"KEY" Warning Lamp (RED) Check

INTELLIGENT KEY SYSTEM


"KEY" Warning Lamp (RED) Check

1.CHECK WARNING LAMP OPERATION
With CONSULT-III
- Check "INDICATOR" in "ACTIVE TEST" mode with CONSULT-III.
- Select "RED ON".
"KEY" warning lamp (red) should illuminate.
Without CONSULT-III
1. Turn ignition switch OFF.
2. Ensure Intelligent Key is outside and away from the vehicle.





3. While monitoring the combination meter warning lamps, push the ignition knob switch.
4. The "KEY" warning lamp (red) should illuminate indicating that the Intelligent Key is not nearby.
OK or NG
OK >> Inspection End.
NG >> Check combination meter. Refer to Locations System Description.