CAN Communication System Inspection

INTELLIGENT KEY SYSTEM


CAN Communication System Inspection

1.CHECK SELF-DIAGNOSTIC RESULTS

With CONSULT-III
- Connect CONSULT-III, and turn ignition switch ON.
- Touch "INTELLIGENT KEY" on "SELECT SYSTEM" screen.
- Touch "SELF-DIAG RESULTS" on "SELECT DIAG MODE" screen.
- Check display content in self-diagnostic results.





OK or NG
NO DTC IS DETECTED>> Inspection End.
CAN COMM [U1000]>> After printing "SELF-DIAGNOSIS RESULTS", go to "CAN SYSTEM". Refer to Trouble Diagnosis Flow Chart.
CAN COMM2 [U1010] >> Replace Intelligent Key unit. Refer to Service and Repair.