Radiator Support: Service and Repair

RADIATOR CORE SUPPORT


Removal and Installation







REMOVAL

Radiator Core Support Upper
1. Remove the air duct. Refer to Service and Repair .
2. Remove the headlamp (LH/RH). Refer to Service and Repair .
3. Remove the hood lock assembly, and remove hood lock cable. Refer to Service and Repair .
4. Remove the air guide and hood lock cable clip.
5. Remove the washer tank inlet. Refer to Service and Repair .
6. Remove the radiator core support upper.

Radiator Core Support Lower
1. Remove the air duct. Refer to Service and Repair .
2. Remove the front bumper. Refer to Service and Repair .
3. Remove the headlamp (LH/RH). Refer to Service and Repair .
4. Remove the hood lock assembly, and remove hood lock cable. Refer to Service and Repair .
5. Remove the air guide and hood lock cable mounting clip.
6. Remove the front bumper reinforcement. Refer to Service and Repair .
7. Remove the radiator core lower stay.

24.5 N.m (2.5 kg-m, 18 ft-lb)

8. Remove the undercover.





9. Remove radiator core support lower side stay.

55.0 N.m (5.6 kg-m, 41 ft-lb)





10. Tie a cord to all radiator core upper supports of the radiator and condenser.

NOTE:
To prevent the condenser and radiator from being dropped when the radiator core lower support is removed.

11. Remove the bolts, and lower radiator core lower supports.
12. Remove the radiator core lower supports.

INSTALLATION
Installation is in the reverse order of removal.