High-Pressure Flexible Hose

REFRIGERANT LINES


Removal and Installation of High-Pressure Flexible Hose


REMOVAL
1. Use the recovery/recycling equipment to evacuate the refrigerant.





2. Remove high-pressure flexible hose (1) bolt (A) from condenser
(2).





3. Remove bolt (A), and then remove high-pressure flexible hose
(1) from compressor (2).

CAUTION:
Cap or wrap the joint of the pipe with suitable material such as vinyl tape to avoid the entry of air.

INSTALLATION
Installation is in the reverse order of removal.

CAUTION:
- Replace O-rings of high-pressure flexible hose with a new ones, and apply compressor oil when installing.
- When recharging refrigerant, check for leaks.