Diagnostic Procedure 2

TROUBLE DIAGNOSIS


Trouble Diagnosis with CONSULT-III


DIAGNOSTIC PROCEDURE 2
Diagnostic code is displayed on "SELF-DIAG [CURRENT]".
If no malfunction is detected on "SELF-DIAG [CURRENT]", but malfunction is detected in "SRS Operation
Check", the following cases may exist:
- "SELF-DIAG [PAST]" memory might not be erased.
- The SRS system malfunctions intermittently. Refer to "DIAGNOSTIC PROCEDURE 4"

CONSULT-III Diagnostic Code Chart ("SELF-DIAG [CURRENT]")





















NOTE:
Follow the procedures in numerical order when performing repairs. Confirm whether the repair has been successful using air bag warning lamp or CONSULT-III after each repair. If malfunction is still observed, proceed to the next step. When malfunction has been eliminated, further repair work is not required.