Rear Internal Gear And Forward Clutch Hub

REPAIR FOR COMPONENT PARTS


Rear Internal Gear and Forward Clutch Hub


COMPONENTS






DISASSEMBLY
1. Remove forward clutch hub from rear internal gear.





2. Remove end bearing (1) from rear internal gear (2).
3. Remove thrust washer from rear internal gear.





4. Remove end bearing (2) from forward one-way clutch (3).
(1): Forward clutch hub





5. Remove forward one-way clutch from forward clutch hub.

INSPECTION

Rear Internal Gear and Forward Clutch Hub
Check rubbing surfaces for wear or damage. Replace if necessary.





(1): Rear internal gear
(2): Forward clutch hub






End Bearings and Forward One-way Clutch
- Check end bearings (1) for deformation and damage. Replace if necessary.
- Check forward one-way clutch (2) for wear and damage. Replace if necessary.






ASSEMBLY
1. Install forward one-way clutch on forward clutch hub.

CAUTION:
Be careful with the direction of forward one-way clutch.





2. Install end bearing (2) on forward one-way clutch (3).
(1): Forward clutch hub





3. Install thrust washer on rear internal gear.

CAUTION:
Align pawls of thrust washer with holes of rear internal gear.





4. Install end bearing (1) on rear internal gear (2).
5. Install forward clutch hub on rear internal gear.






CAUTION:
- Check operation of forward one-way clutch.
Hold rear internal gear and turn forward clutch hub.











Check forward clutch hub for correct locking and unlocking directions.
- If not as shown, check the installation direction of forward one-way clutch.