Air Breather Hose

AIR BREATHER HOSE


Removal and Installation


COMPONENTS






REMOVAL
1. Remove air duct (front), air duct (inlet) and air cleaner case. Refer to Service and Repair Service and Repair.
2. Remove air breather hose.

INSTALLATION
Installation is in the reverse order of removal.

CAUTION:
Make sure air breather hose is not collapsed or blocked due to folding or bending when installed.

NOTE:
- Install the air breather hose (1) to the air breather tube (2) so that the paint mark (A) faces upward. Also make sure the air breather hose end laps with air breather tube 17 mm (0.67 in) or more.





- When installing air breather hose (1) to air duct and air cleaner case, make sure to fully insert the hose clips.