CVT RE0F08B

SHIFT CONTROL SYSTEM


Adjustment of CVT Position


CAUTION:
Make sure that parking brake is applied before adjustment.





1. Loosen the control cable nut (A) and place the manual lever (1) in "P" position.
2. Place selector lever in "P" position.
3. Push the control cable (2) in with a load of 9.8 N (approximately
1 kg, 2.2 lb). Release the control cable and temporarily tighten the control cable nut.

NOTE:
Do not move the manual lever. Make sure the manual lever stays in the "P" position.
4. Tighten the control cable nut.

CAUTION:
Secure the manual lever when tightening nut.

Control cable nut: Refer to Shift Control System.

5. Check the operation of the CVT. Refer to CVT RE0F08B.