CVT RE0F08B

SHIFT CONTROL SYSTEM


Control Device Disassembly and Assembly


DISASSEMBLY

NOTE:
Refer to Shift Control System to disassemble.
1. Remove selector lever knob from control device assembly. Refer to Selector Lever Knob Removal And Installation.





2. Remove position lamp from position indicator plate (1).
3. Insert a suitable tool to (A) (at 4 locations) as shown, and bend each hook slightly to raise position indicator plate (1) and remove from control device assembly (2).
4. Remove bracket from control device assembly (2).
5. Remove CVT device harness connector from control device assembly (2).





6. Release tabs (A) on shift lock solenoid and park position switch assembly from hooks (B) on control device assembly to shift lock solenoid and park position switch assembly.

ASSEMBLY
Assembly is in the reverse order of disassembly.