Seals and Gaskets: Service and Repair

SIDE OIL SEAL


Removal and Installation


REMOVAL
1. Remove front drive shafts from transaxle assembly. Refer to Removal and Installation (Left Side).





2. Remove differential side oil seal (1) using a suitable tool.

CAUTION:
Be careful not to damage transaxle case and clutch housing.

INSTALLATION
Installation is in the reverse order of removal.
- Install differential side oil seals (1) to clutch housing and transaxle case using Tool (A).
- B: Transaxle case side
- C: Clutch housing side






CAUTION:
- Never reuse differential side oil seal.





- When installing, never incline differential side oil seal.
- Never damage clutch housing and transaxle case.
Check oil level and oil leakage after installation. Refer to Checking M/T Oil.