Revolution Sensor

ON-VEHICLE SERVICE


Revolution Sensor


COMPONENTS






REMOVAL AND INSTALLATION

Removal
1. Disconnect the battery negative terminal.
2. Remove air duct (inlet), air duct and air cleaner case. Refer to Service and Repair.





3. Remove gusset (1).
4. Disconnect revolution sensor harness connector.





5. Remove clip (A).
6. Remove revolution sensor (1) from A/T.
: Bolt
7. Remove O-ring from revolution sensor (1)

Installation
Installation is in the reverse order of removal.

CAUTION:
- Do not reuse O-ring.
- Apply ATF to O-ring.





- Ensure revolution sensor harness is firmly secured with bolt.
(1): Revolution sensor
: Bolt