Front Power Window Motor LH Circuit Inspection

POWER WINDOW SYSTEM


Front Power Window Motor LH Circuit Inspection

1.CHECK MAIN POWER WINDOW AND DOOR LOCK/UNLOCK SWITCH OUTPUT SIGNAL





1. Turn ignition switch OFF.
2. Check voltage between main power window and door lock/unlock switch connector D7 terminals 8, 11 and ground.






OK or NG
OK >> GO TO 2.
NG >> Replace main power window and door lock/unlock switch. Refer to Removal and Installation .
2.CHECK POWER WINDOW MOTOR CIRCUIT





1. Turn ignition switch OFF.
2. Disconnect main power window and door lock/unlock switch and front power window motor LH.
3. Check continuity between main power window and door lock/unlock switch connector and front power window motor LH connector.






4. Check continuity between main power window and door lock/unlock switch connector and ground.





OK or NG
OK >> Replace front power window motor LH. Refer to Removal And Installation .
NG >> Repair or replace harness.