Only Front Wiper Intermittent Does Not Operate

FRONT WIPER AND WASHER SYSTEM


Only Front Wiper Intermittent Does Not Operate

1.CHECK COMBINATION SWITCH

With CONSULT-III
1. Select "BCM" on CONSULT-III, and select "WIPER" on "SELECT TEST ITEM" screen.
2. Select "DATA MONITOR" on "SELECT DIAG MODE" screen. Make sure that "FR WIPER INT", turn ONOFF according to wiper switch operation.
Without CONSULT-Ill
Refer to Component Tests and General Diagnostics .
OK or NG
OK >> Replace BCM. Refer to Service and Repair .
NG >> Check combination switch (wiper switch). Refer to Component Tests and General Diagnostics .