Only Rear Wiper Intermittent Does Not Operate

REAR WIPER AND WASHER SYSTEM


Only Rear Wiper Intermittent Does Not Operate

1.CHECK COMBINATION SWITCH INPUT SIGNAL
Select "BCM" on CONSULT-III. With "WIPER" data monitor, make sure "RR WIPER INT" turns ON-OFF according to operation of wiper switch.

When rear wiper switch is in INT position : RR WIPER INT ON

OK or NG
OK >> Replace BCM. Refer to Service and Repair .
NG >> Check the wiper switch. Refer to System Description .