Wiper Does Not Wipe When Rear Washer Operates

REAR WIPER AND WASHER SYSTEM


Wiper Does Not Wipe When Rear Washer Operates

1.CHECK COMBINATION SWITCH INPUT SIGNAL
Select "BCM" on CONSULT-III. With "WIPER" data monitor, make sure "RR WASHER SW" turns ON-OFF according to operation of rear washer switch.

When rear wiper switch is in WASHER position : RR WASHER SW ON


OK or NG
OK >> Replace BCM. Refer to Service and Repair .
NG >> Check the wiper switch. Refer to System Description .