B176A

B176A THERMO PROTECTION





DTC Logic

DTC DETECTION LOGIC

NOTE:
If two or more DTCs are detected, RF, and determine trouble diagnosis order.






DTC CONFIRMATION PROCEDURE
1.PERFORM DTC CONFIRMATION PROCEDURE
1. Move the vehicle to a location where ambient temperature is 0�C or more and wait for a period of time.
2. Turn ignition switch ON.
3. Select "Self Diagnostic Result" mode of "CONVERTIBLE ROOF" using CONSULT-III.
4. Check DTC.
Is DTC detected?
YES - Go to B177C.
NO - INSPECTION END




Diagnosis Procedure
1.REPLACE SOFT TOP CONTROL UNIT
1. Turn ignition switch OFF.
2. Replace soft top control unit. Removal And Installation.
- INSPECTION END