Coupe

DOOR LOCK


DOOR LOCK : Removal and Installation


REMOVAL
1. Remove door finisher. Coupe.
2. Remove door glass. Removal And Installation.
3. Remove door module assembly. Removal And Installation.
4. Disconnect key rod (driver side) and outside handle cable from outside handle assembly.
5. Remove door lock assembly TORX bolts.
6. Disconnect door lock actuator connector, and then remove door lock assembly.

INSTALLATION
Install in the reverse order of removal.

CAUTION:
- Check that door lock cables are normally engaged with inside handle and outside handle.
- When installing key rod, rotate key rod holder until a click is felt.
- After installation, check door open/close, and lock/unlock operation.