Coupe

AUTO DOOR LOCK OPERATION DOES NOT OPERATE


Diagnosis Procedure

1.CHECK "AUTO LOCK SET" SETTING IN "WORK SUPPORT"
1. Select "INTELLIGENT KEY" of "BCM" using CONSULT-III.
2. Select "AUTO LOCK SET" in "WORK SUPPORT" mode.
3. Check "AUTO LOCK SET" setting in "WORK SUPPORT". Coupe.
Is the inspection result normal?
YES - GO TO 2.
NO - Set "AUTO LOCK SET" setting in "WORK SUPPORT".
2.REPLACE BCM
- Replace BCM. Removal And Installation.
- Confirm the operation after replacement.
Is the result normal?
YES - INSPECTION END
NO - Check intermittent incident. Intermittent Incident.