Removal And Installation

STORAGE LID


STORAGE LID EMERGENCY OPENER : Removal and Installation


REMOVAL
1. Remove trunk finisher front. Exploded View.





2. Remove tapes (1).





3. Operate soft top as shown in the figure.

CAUTION:
Storage lid assembly may close due to low oil pressure.
Always support storage lid assembly in the fully open position using a supporting block.





4. Remove bolts (A). Remove emergency cable upward.





5. Remove rear mounting clips of storage room finisher.
6. Pull out emergency cable through storage room finisher hole
(A).
7. Pull out emergency cable through hole (B) to trunk room.

Broken circle indicates: Clip

8. Disengage clip connecting emergency cable. Remove emergency cable.

INSTALLATION
Install in the reverse order of removal.

CAUTION:
After installation, check storage lid open/close lock/unlock operation.