Component Inspection (Clutch Pedal Position Switch)

ASCD BRAKE SWITCH


Component Inspection (Clutch Pedal Position Switch)

1.CHECK CLUTCH PEDAL POSITION SWITCH-I
1. Turn ignition switch OFF.
2. Disconnect clutch pedal position switch harness connector.
3. Check the continuity between clutch pedal position switch terminals under the following conditions.





Is the inspection result normal?
YES - INSPECTION END
NO - GO TO 2.
2.CHECK CLUTCH PEDAL POSITION SWITCH-II
1. Adjust clutch pedal position switch installation. Adjustments.
2. Check the continuity between clutch pedal position switch terminals under the following conditions.





Is the inspection result normal?
YES - INSPECTION END
NO - Replace clutch pedal position switch.