Removal And Installation

BODY SIDE TRIM


DASH SIDE FINISHER : Removal and Installation


CAUTION:
- When removing, always use a remover tool that is made of plastic.
- Never damage the body.

REMOVAL
1. Remove kicking plate inner. Removal And Installation.





2. Remove clip (A).
3. Remove dash side finisher (1) fixing clips with remover tool (B), and then remove dash side finisher.

Broken circle indicates: Clip


INSTALLATION
Note the following item, and install in the reverse order of removal.

CAUTION:
When installing, check that all clips are securely fitted in panel holes on body, and then press them in.