Coupe

HAZARD AND HORN REMINDER DOES NOT OPERATE


Diagnosis Procedure

1.CHECK "HAZARD ANSWER BACK" SETTING IN "WORK SUPPORT"
1. Select "INTELLIGENT KEY" of "BCM" using CONSULT-III.
2. Select "HAZARD ANSWER BACK" in "WORK SUPPORT" mode.
3. Check the "HAZARD ANSWER BACK" setting in "WORK SUPPORT". Coupe.
Is the inspection result normal?
YES - GO TO 2.
NO - Set the "HAZARD ANSWER BACK" setting in "WORK SUPPORT".
2.CHECK "HORN WITH KEYLESS LOCK" SETTING IN "WORK SUPPORT"
1. Select "INTELLIGENT KEY" of "BCM" using CONSULT-III.
2. Select "HORN WITH KEYLESS LOCK in "WORK SUPPORT" mode.
3. Check the "HORN WITH KEYLESS LOCK y setting in "WORK SUPPORT". Coupe.
Is the inspection result normal?
YES - GO TO 3.
NO - Set the "HORN WITH KEYLESS LOCK ..setting in "WORK SUPPORT".
3.CHECK HAZARD FUNCTION
Check hazard function. Coupe.
Is the inspection result normal?
YES - GO TO 4.
NO - Repair or replace the malfunctioning parts.
4.CHECK HORN FUNCTION
Check horn function. Component Function Check.
Is the inspection result normal?
YES - GO TO 5.
NO - Repair or replace the malfunctioning parts.
5.CONFIRM THE OPERATION
Confirm the operation again.
Is the result normal?
YES - Check intermittent incident. Intermittent Incident.
NO - GO TO 1.