The Oil Pressure Warning Lamp Does Not Turn ON

THE OIL PRESSURE WARNING LAMP DOES NOT TURN ON


Description

The oil pressure warning lamp stays off when the ignition switch is turned ON.





THE OIL PRESSURE WARNING LAMP DOES NOT TURN ON


Diagnosis Procedure

1.CHECK OIL PRESSURE WARNING LAMP
Perform auto active test. Diagnosis Description.
Is oil pressure warning lamp blinking?
YES - GO TO 2.
NO - GO TO 4.
2.CHECK OIL PRESSURE SWITCH SIGNAL CIRCUIT
Check the oil pressure switch signal circuit. Diagnosis Procedure.
Is the inspection result normal?
YES - GO TO 3.
NO - Repair harness or connector.
3.CHECK OIL PRESSURE SWITCH
Perform a unit check for the oil pressure switch. Component Inspection.
Is the inspection result normal?
YES - Replace IPDM E/R.
NO - Replace oil pressure switch.
4.CHECK COMBINATION METER INPUT SIGNAL
Connect CONSULT-III and perform an input signal check for the combination meter. Component Function Check.
Is the inspection result normal?
YES - Replace combination meter.
NO - Replace IPDM E/R. Removal And Installation.