Description

HEADLAMP AIMING ADJUSTMENT


Description


PREPARATION BEFORE ADJUSTING

NOTE:
- For details, refer to the regulations in your own country.
- Perform aiming if the vehicle front body has been repaired and/or the headlamp assembly has been replaced.

Before performing aiming adjustment, check the following.
- Adjust the tire pressure to the specification.
- Fill with fuel, engine coolant and each oil.
- Maintain the unloaded vehicle condition. (Remove luggage from the passenger compartment and the luggage room.)

NOTE:
Do not remove the temporary tire, jack and on-vehicle tool.
- Wipe out dirt on the headlamp.

CAUTION:
Never use organic solvent (thinner, gasoline etc.)
- Ride alone on the driver seat.

AIMING ADJUSTMENT SCREW