Crankshaft Main Bearing

SERVICE DATA AND SPECIFICATIONS (SDS)


Main Bearing


MAIN BEARING






UNDERSIZE






MAIN BEARING OIL CLEARANCE








Main Bearing Cap Torque & Sequence

Install lower cylinder block bolts as follows:





Arrow Indicates Engine front

- Tighten bolts (No. 17 to 26) in numerical order as shown in the figure.

Torque : 25.0 N.m (2.6 kg-m, 18 ft-lb)

- Repeat above step.

- Tighten bolts (No. 1 to 16) in numerical order as shown in the figure.

NOTE: Use TORX socket for bolts No.1 to 16.

Torque : 35.3 N.m (3.6 kg-m, 26 ft-lb)

- Turn bolts (No. 1 to 16) 90 degrees clockwise (angle tightening).